Slant Plate Clarifier
Slant plate sedimentation tank is an efficient combined sedimentation tank designed according to the theory of sedimentation tanks. It is also called an slant plate sedimentation tank. There are a number of dense slant plates or inclined plates in the settlement area to...
Send InquiryIntroduction
Slant plate sedimentation tank is an efficient combined sedimentation tank designed according to the theory of sedimentation tanks. It is also called an slant plate sedimentation tank. There are a number of dense slant plates or inclined plates in the settlement area to precipitate impurities suspended in the water. In a sloping plate or tube, water flows up the sloping plate or tube.
The separated sludge moves along the inclined plate under the action of gravity. (Pipeline) slides down to the bottom of the pool, and then discharges intensively. This type of tank can increase the precipitation efficiency by 50-60%, and increase the processing capacity by 3-5 times on the same area. It can be designed based on the raw wastewater test data of different flow inclined pipe settler, and flocculant is usually added during use. The inclined pipe sedimentation method and the water purification method are provided with an inclined pipe with an inclination angle of 60 degrees above the sludge suspension layer. Flocculant alum flowers formed by adding coagulant to suspended matter and solids in raw water are located on the bottom surface of the slant plate. The surface area accumulates into a thin mud layer, which relies on gravity to slide back to the suspended sludge layer, and then sinks into the mud bucket. The sewage pipe is discharged into the sludge pond for further processing or comprehensive utilization. The supernatant gradually rises to the drain of the collecting pipe, which can be directly discharged or reused.
Product detail
Original: Jiangsu, China
Certification: ISO9001, ISO14001, etc.
Price: Negotiable
Material: SUS304/SUS316L/Q235
Voltage: 380V 50Hz, the voltage can be as local demand
Payment term: TT, LC
Delivery date: Negotiable
Packing: export standard
Market: Middle East/ Africa/Asia/South America/Europe/North America
Warranty: 1 year
MOQ: 1 set
Equipment characteristics
1. The installation direction of the inclined plate and inclined pipe filler is the direction that tends to the water flow. The water inlet must be under the filler, at least half a meter deep.
2. The distance between inclined plates (pipes) is generally not less than 50mm, and the length of inclined plates (pipes) is generally about 1.0-1.2m;
3. The upper layer of the inclined plate should have a water depth of 0.5-1.0m, and the height of the bottom buffer layer is 1.0m. Below the sloping plate (pipe) is the waste water distribution area, generally the height is not less than 0.5m, and the lower part of the water distribution area is the sludge area;
4. The effluent of the pool is generally collected by multiple rows of perforated pipes, and the holes should be 2cm below the water surface to prevent floating objects from being taken away;
5. The flow rate of waste water in the inclined pipe depends on different waste water. For example, when treating domestic sewage, the flow rate is 0.5-0.7mm / s.
6. The inclined plate (pipe) is at an angle of 60 ° to the horizontal plane, and the clear distance (or the diameter of the inclined pipe) of the inclined plate is generally 80 to 100 mm.
Hot Tags: slant plate clarifier, China, suppliers, manufacturers, factory, customized, price, OEM
