Full-automaitc Inclined Tube Settler
Inclined tube sedimentation tank is a treatment structure that removes suspended particles with a density greater than water from water by gravity sedimentation. It is one of the widely used treatment units in wastewater treatment.
Send InquiryIntroduction
Inclined tube sedimentation tank is a treatment structure that removes suspended particles with a density greater than water from water by gravity sedimentation. It is one of the widely used treatment units in wastewater treatment. It can be used for wastewater treatment, biological treatment post-treatment and advanced treatment.
The sedimentation principle uses the sedimentation principle to remove inorganic impurities in water, the primary sedimentation principle uses the sedimentation principle to remove suspended matter and other solids in the water, and the secondary sedimentation principle uses the sedimentation principle to remove activated sludge from biologically treated effluent. The pond uses the sedimentation principle to separate the water in the sludge, so that the sludge can be concentrated. In the advanced treatment category, the effluent of the secondary sedimentation tank is coagulated with a flocculant and the sedimentation principle can be used to remove suspended matter in the water. The sedimentation tank includes five parts: the water inlet area, the sedimentation area, the buffer zone, the sludge area and the water outlet area. The role of the water inlet area and the water outlet area is to make the water flow evenly through the sedimentation pool, to prevent short-flow and reduce the adverse effects of turbulence on the deposition of cattle, and to reduce the dead water area and improve the volume utilization rate of the sedimentation pool; the sedimentation area is also called The clarification area, that is, the operation area of the sedimentation tank, is sufficient to separate sediment particles from wastewater; the sludge area is the area where sludge is stored, concentrated, and discharged; the buffer zone is the area of the water layer separating the sedimentation area and the sludge area To ensure that the particles that have been deposited will not float again due to the agitation of the water flow.
Product detail
Original: Jiangsu, China
Certification: ISO9001, ISO14001, etc.
Price: Negotiable
Material: SUS304/SUS316L/Q235
Voltage: 380V 50Hz, the voltage can be as local demand
Payment term: TT, LC
Delivery date: Negotiable
Packing: export standard
Market: Middle East/ Africa/Asia/South America/Europe/North America
Warranty: 1 year
MOQ: 1 set
Equipment characteristics
Inclined tube has good comprehensive performance. Although the inclined tube has a small hydraulic radius and a low Reynolds number, the settlement capacity is stronger than that of the inclined plate, which has a great advantage in economic cost.
The inclination angle of a sloping tube or plate is a basic design parameter. The precipitation efficiency is the highest when inclined at 45--60 degrees, and the "self-cleaning" effect of the settled particles is strong.
Maintain the hydraulic balance and reasonably design the processing load of the inclined tube or inclined plate. Although the inclined tube or inclined plate subsidence system can increase the surface load factor by 100-200% while ensuring the quality of the effluent water, the maximum The surface load rate should be controlled at 5-6.3m / h, and it should not exceed 7.5 --- 8.8m / h in warm tropical regions.
Honeycomb inclined tube packing is a kind of sedimentation tank packing designed and developed based on the theory of "shallow sedimentation". The packing has a large wet cycle, a small hydraulic radius, a good laminar flow state during operation, and particle sedimentation is not disturbed by turbulence and can accelerate. The particles are separated from the water and the sedimentation distance of the particles is shortened.
Hot Tags: full-automaitc inclined tube settler, China, suppliers, manufacturers, factory, customized, price, OEM
