Decarbonation Tower
The carbon remover is also called a degassing tower. It is a device that removes free CO2 in the dehydration by the wind power of the fan. On the one hand, it reduces the corrosion of the boiler and the filter.
Send InquiryDecarbonation tower Introduction
The carbon remover is also called a degassing tower. It is a device that removes free CO2 in the dehydration by the wind power of the fan. On the one hand, it reduces the corrosion of the boiler and the filter.
Product detail
Original: Jiangsu, China
Certification: ISO9001, ISO14001, etc.
Material: FRP/Q235
Voltage: 380V 50Hz, the voltage can be as local demand
Payment term: TT, LC
Market: Middle East/ Africa/Asia/South America/Europe/North America
Warranty: 1 year
MOQ: 1 set
Equipment characteristics
The carbon remover produced by our company is composed of a water inlet device, a filler, a fan, and a water tank. The water inlet device generally uses a mother branch pipe to distribute water. The material can be selected from 304 wire wound pipe and 316 wire wound pipe according to different needs. According to the different water quality, ceramic and plastic can be used. It mainly serves to increase the surface area of water, so that carbon dioxide can be better blown off. The fan mainly provides a wind source, so as to blow off and store the carbon dioxide of water. The water tank allows the treated water to be stored and can be pumped into the subsequent equipment through the booster pump. When the carbon remover is working, the water enters from the upper part, is poured through the water distribution device, passes through the filler layer, and is discharged into the water tank from the lower part, and the fan The wind direction provided by is reversed, that is, it is blown off from the bottom to the top, after passing through the packing layer, it is discharged from the top. The principle is that when the air flow blowing into the carbon remover comes into contact with the carbon removal water, the CO2 in the water will be carried out by the air flow.
Carbon dioxide removal performance parameters
1. Carbon dioxide content in the inlet water: ≤390mg / l.
2. Carbon dioxide content in effluent: ≤5mg / l.
3. Working temperature: ≤50 ℃.
4. Water treatment capacity: 1.0 ～ 300m3 / h.
5. Working pressure: normal pressure
6. Product specifications: Φ300 ～ Φ2500
7. Simplified materials: 304, 316L, Q235 rubber lined
Product process
If the water contains a certain amount of CO2, CO2 and water produce carbonic acid The ionized hydrogen ions corrode the various containers behind. Another role, if used in anion and cation exchangers, can reduce the load of the anion exchanger, improve the economics of the chemical desalination process, and the quality of the effluent water is generally influent When the content of HCO3> 50mg/L, set the carbon remover, and the CO2 content of the effluent is less than 5mg/L. The carbon remover is generally set after the cation exchanger or reverse osmosis device. Another function of the deaeration tower can be used as an aeration device, mainly to oxidize the iron and manganese before the iron removal and manganese filters are installed, so that the manganese sand filter can better absorb and remove the iron and manganese in the water. Compared with pipeline aeration, it has more atmospheric flow, so it produces better oxidation effect. Compared with blower aeration, the deaeration tower aeration is a centrifugal fan with low power. This aeration greatly saves electrical energy, so in actual Get a wider quote.
Hot Tags: decarbonation tower, China, suppliers, manufacturers, factory, customized, price, OEM
