Artificial waterweed is a brand-new fabric-type biofilm carrier technology jointly developed by German Aquaration Water Management Co., Ltd. and collaborators. Based on the plant principle, we optimize the fabric filler to make it beneficial to the formation and regeneration of biofilm, thereby greatly providing the operation effect of sewage treatment plants. The applicability of FAB artificial waterweed is very strong, suitable for almost all types of sewage treatment plants and bioreactors and landscape water bodies.

Its characteristics can be summarized as follows:

1. Save on civil construction investment.

2. Stable biological treatment and high degradation rate.

3. The system is reliable and has a long service life.

4. FAB artificial waterweed is also an ideal process for transforming old sewage treatment plants that cannot meet standard discharge. Energy consumption is lower than traditional processes.

5. Compared with other artificial waterweeds currently on the market, the price is greatly reduced, saving investment

 FAB Artificial Weed Properties

Synthetic fabric filler made of 100% polypropylene,

Color: White (similar to water coloring after hanging film in water, does not affect water landscape)

   Finished weight: 1kg / 100m

   Specific surface area: 160m2 / m

   Tensile strength: 90 ～ 99N / piece

   Applicable alkalinity: pH3 ～ 12

   Applicable water quality: COD ＞ 3000mg / l

   Use environment: aerobic

   Hanging film duration: ＜ 4 ℃ 15 days

                4 ～ 15 ℃ for 10 days

                15 ～ 25 ℃ 7 days

                ＞ 25 ℃ 5 days

   Film forming weight: 6.9kg / m3 (wet)

   Load: 4 ～ 6COD · kg / m3 · d

   Use method: Hanging (sewage plant), install according to design requirements (landscape water)

 advantage analysis

1.The biological activity of the microbial flora is increased by about 70%.

2.Aeration improves the adhesion of microbial flora and greatly improves the stability of the system's operating performance, so the impact resistance is strong;

3. Due to the high oxygen utilization coefficient (a value) and small pool capacity, the energy consumption of the equipment is low.

4. The operation effect is good and reliable, which has been proved in several engineering examples in Europe.

5. The effluent quality is up to standard and higher than the required standard.

6, suitable for various occasions, especially for large landscape water bodies.

7. The capacity can be expanded according to demand, and the operation is simple.

8. No need to discharge waste water during maintenance.

9, long service life, one-off investment

Assurance and assessment

2.Use effect guarantee

Film hanging period: ＜ 4 ℃ 15 days

4 ～ 15 ℃ for 10 days

15 ～ 25 ℃ 7 days

＞ 25 ℃ 5 days

Film forming weight: 6.9kg / m3 (wet)

Under the corresponding operating conditions, it is easy to hang the film, and it is timely and appropriate to fall off and update to ensure the product design hanging film amount.

Artificial waterweed landscape water water treatment artificial lake