Summer is hot, and many people choose to go to the swimming pool and water park to cool off. Sodium hypochlorite generators are used in many swimming pools and water parks. Sodium hypochlorite is added to the filtered pipeline, and it is fully mixed with water and returned to the swimming pool. After full contact in the pool, it can maintain continuous sterilization for a long time. In order to control the amount of bacteria and viruses in the pool water; control the reproduction of algae at all times, and reduce the amount of copper sulfate.

    The sodium hypochlorite generator is composed of three basic parts, that is, a salt water deployment device, an electrolytic cell system and an electrolytic power source. The salt tank is large, the salt effect is good, and the appearance is beautiful. demand.

1. Before operation, the sodium hypochlorite generator should check the tightness of the connection and the opening and closing status of the valves. Special attention should be paid to whether the connection of the hydrogen discharge port at the back is unimpeded to the outdoor.

2. During daily use, users should regularly clean the equipment according to their local water quality conditions, keep the equipment clean, and avoid the accumulation of impurities.

3. During the installation and use of sodium hypochlorite generator, it is strictly forbidden to impact, knock, and protect the anode coating to avoid injury.

4. During the operation of the equipment, always observe whether the electrolytic current and voltage of the equipment are within the specified range. Detect the circulation of salt solution and cooling water in time to prevent clogging.

5. The equipment needs to be shut down and checked regularly, measure the electrolyte conductivity, and calibrate the brine pump and soft water flow.

6. The sodium hypochlorite generator should be installed in a well-ventilated and well-lit room during the installation process, and the surroundings should be kept clean and tidy, and no debris should be piled up. The hydrogen exhaust pipes should be placed outdoors, and no open flames or other sources of ignition should be avoided in the surroundings. Pyrotechnics are strictly prohibited indoors.

7. The equipment alarms regularly and automatically / manually, and pickling solution should be prepared in advance. The pickling cycle is 6-12 months / time.

8. During the electrolytic reaction of the equipment, the effective chlorine content should be kept within 1%, because if the chlorine content is too high, it will not only affect the reaction result of the treatment, but also affect the service life of the electrode.

9. Pay attention to the connection between the positive and negative poles of the generator to the positive and negative poles of the rectifier during installation and use. Do not connect them incorrectly, otherwise the service life of the electrode tube will be seriously affected.

10. It is strictly forbidden to start the DC power supply when the cooling water is cut off. It is forbidden to evacuate the salt solution of the circulation tank while the DC power supply is conducting electrolysis