The installation of aeration pipes is generally a "non" type installation method. For fixed installations, a perforated cap end and a support frame should be added to strengthen the supporting force of the end of the microporous aeration pipe. This installation method The advantage lies in uniform aeration. When installing the aeration pipe, it must be on a horizontal line and in a vertical position, and the force must be applied evenly, and the force must not be applied on one side, so that the installation is uneven and affects the air distribution. Use a torque clamp to fix the other tube aerator. After installation, pour clean water into the pool and start system debugging immediately. If the aeration pipe is not put into use immediately after the trial operation, the water level needs to be raised to a position 1m higher than the aeration pipe . Please pay attention to the water evaporation factor and ensure that the water level is kept high before the equipment is finally put into operation. In the case of frost, the water level above the aeration pipe should be at least 10% of the lowest temperature ( calculated in metric system ) .

https://www.khnwatertreatment.com/