The high-efficiency shallow air flotation air compressor can be started manually. When operating, observe whether the air compressor is running well. In addition to dealing with the operation sound of the equipment, carefully listen to whether there is any noise. If there is, you need to find out the reason in time. After finishing the preparatory work before debugging, enter the formal debugging stage. When debugging a high-efficiency shallow air flotation machine, a test run of the machine should be done. Before the test run, turn on the power first, then turn on the water pump, and turn on the switch of the foam scraper at the same time. The air flotation machine will run toward the dissolved air system, and then walk in the opposite direction until it enters the sludge tank. When the collision block makes the scraper turn up. After that, you can press the stop operation switch, and the scraping process ends.

High-efficiency shallow air flotation can add water during trial operation, and the water level can be about 50 mm above the sludge tank partition of the air flotation machine. In addition, the water level can be adjusted accordingly with the water collector. After adding water, start the machine to see if the dissolved air system and the air flotation system are running well, and record the relevant conditions of the trial operation.

The main body of the device is composed of five major parts: the pool body, the rotating water distribution mechanism, the dissolved air release mechanism, the frame mechanism, and the water collecting mechanism. The water inlet, water outlet and scum discharge outlet are all concentrated in the central area of the pool body. The water distribution mechanism, the water collecting mechanism and the dissolved air release mechanism are all closely connected with the frame and rotate around the center of the pool body.

https://www.khnwatertreatment.com/