Perforated Plate Fine Screen is an efficient separating equipment which is mainly used in the treatment of industrial wastewater such as paper making, slaughter, leather, sugar making, wine making, food processing, textile, printing and dyeing, petrochemical, etc. to remove suspended solids, floats, precipitates and other solid substances.

Perforated Plate Fine Screens are now used more and more widely, as the product is a non-standard products, the purchase of such equipment must be combined with practical considerations. The first thing you need to know is exactly what material is removed from the sewage, because these parameters will determine the mechanical grid gap.

It is also necessary to know the width and depth of the grille pool; to know the PH value of the sewage, as this is directly related to the material used in the Perforated Plate Fine Screen; and to provide the height of the slag outlet, as well as the installation angle of the Perforated Plate Fine Screen, which is normally installed at 75 degrees.

Before starting the Perforated Plate Fine Screen, we must use the shaft handle to rotate at the tail of the motor. When the rake teeth move normally and there is no noise vibration, we can start the machine. We should take off the shaft handle. Before starting the machine formally, we should test whether the motor runs in the same direction as the rake teeth of the equipment, and then move several times before everything is correct. Normally, it can be put into operation normally. At the same time, attention should be paid to other supporting equipment, such as conveyor and press, and so on.http://www.khnwatertreatment.com/