During the working process of the scraper and suction machine, the inlet and outlet grooves of the sedimentation tank are designed with side sections, which can effectively ensure the uniform water distribution and outflow around the sedimentation tank. The driving device of the scraper and suction machine mainly adopts helical gears. The combination of the reducer and the worm gear reducer can effectively ensure its output torque and speed, and the transmission effect is high; the reducer is equipped with an over-torque protection device, which is safe and reliable in operation;

There are two kinds of skimming methods for scraping and suction mud machine: plate skimming and tubular skimming. The equipment is very simple in the process of operation, and the operation of its equipment can be controlled directly or remotely during use.

Scraping and suction mud machines are also often used in sewage treatment plants to scrape the sludge deposited at the bottom of the pool to the suction port of the pump, suck the mud while walking through the pump, and then discharge the sludge out of the pool, which can relieve the pain of cleaning the sludge at the bottom of the pool. .

The scraper and suction mud machine mainly adopts its truss structure in the production process, which is much lighter than the traditional structure. The use of its hot-dip galvanized anti-corrosion process can ensure that it will not corrode within 5 years, and The parts in contact with water are made of 304 stainless steel, which greatly prolongs the service life.

The scraper and suction mud machine requires less maintenance, low operating cost when using small power, reasonable pump selection during use, stable and reliable operation of the entire equipment, and a new type of transmission mechanism to avoid walking errors at both ends. The walking wheel is a steel wheel, which ensures the service life.

https://www.khnwatertreatment.com/