For the drum grid machine, whether the installation of the chain meets the standard has a more important impact on the later application. Today we will talk about how to install the chain and the problems encountered by the common chain of the drum grille machine.

Introduction to the installation method of drum grille machine

The installation of the chain is that after the lower grid body is aligned with the side beam and connected with bolts, the chain is pulled up, installed according to the standard specification, and the chain lock pin is pulled out to make it tightly combined, and its tightness can be adjusted to prevent impurities from blocking the chain drive wheel.

In the application, the problem of broken chain and derailment may occur for three reasons.

1. The chain plate and the chain are riveted to cause disconnection.

2. The arc rotating part between the chain and the back of the grid will cause disconnection under high pressure.

3. The deformation of the rake causes uneven force on the rake, which leads to chain compression and derailment.

https://www.khnwatertreatment.com/