So how should we adjust the dissolved air flotation machine? Before the dissolved air flotation machine is a car, we should make the following preparations:

1. Clean the impurities and welding slag in the pool.

2. Lubricate the necessary parts such as water pumps and air compressors.

3. Turn on the power again to start the dissolved air pump. We need to see if the direction of the steering and the arrow is the same. You can start the air compressor manually, and it is also necessary to check whether the air compressor is running normally.

4. Press the switch of the slag scraper, and when the stroke is fast, we have to walk in the opposite direction, wait until the scraper is turned up, and then press the stop button to stop scraping.

5. Keep the dosing device in a good state and separate the sewage from the suspended solids.

Through the introduction of these two aspects, I believe that everyone should have some understanding of the dissolved air flotation machine. If you have this need, our company's products will give you peace of mind.

https://www.khnwatertreatment.com/