1. After the installation of the tubular aerator is completed, the water seepage test is performed, and the requirements of the hydrolysis and acidification tank are basically uniform.

2. When running again, open the drain valve of each group, use the standard air pressure to discharge the water stored in the pipe, and then adjust the air supply to the ideal hydrolysis and acidification tank condition.

3. After the installation of the tubular aerator, it must be engulfed in waste water or cold water to test the hydrolysis and acidification tank. Do not expose it to the sun to prevent sharp objects from falling into the pool and damaging the microporous aeration pipe.

4. The tubular aerator is not suitable for pressure, and it is not suitable for accumulation in the outdoors. It should avoid fire sources and hard blocks to prevent damage.

https://www.khnwatertreatment.com/