Integrative dosing device is an ideal automatic dosing device according to market demand. It only needs to manually throw solid powder material into the hopper. The system can add dry powder automatically or manually. After mixing the dry powder and water in the dissolution box evenly, the powder can be transported to the dilution box for stirring. The powder can be transported from the dilution box to the storage box for storage. The powder can be proportionally added to the pipeline by the dosing pump to meet the dosing requirements.

Before leaving the factory, all parts of the integrated dosing device have been installed on the rack, which has been integrated and debugged correctly. Users generally do not need to adjust, the whole machine before leaving the factory, the bearings and reducers have been added enough lubricating oil, the whole machine moved to the original design base, connected to the power line, water pipeline, can be put into use.

After the installation of the integrated dosing device is completed and the connection of the motor wires and power wires is checked, the equipment can be put into trial operation. When the power switch is closed, the power indicator lights on the electronic control box are on, and the "start button" of each stirring motor is started manually, and the working indicator lights of each stirring motor are on, so as to observe whether the motor steering is correct or not, if not, please adjust it; if the "stop" button is pressed, the stirring motor stops turning.

When adding water to each box or requiring the reflux pump to work, the relevant switch can be set in the "on" position, when the working indicator light is on, and when stopping, in the "off" position. Put the switch of "dry powder dosing" in the "manual" position, and the switch of "dry powder dosing adjustment" in the "ON" position. Feed the speed regulating motor to work and start feeding.

After all the motor manual test machines of the integrated dosing device have no problems, according to the working time of each feeding motor and the setting time of the time relay, the "dry powder feeding" switch can be hit at the "automatic" position, while the "dry powder feeding" adjusting "electronic speed control switch" is set at the "ON" position, and the feeding speed control motor will work and start feeding. After the setting time, the feeding motor stops running. When it is necessary to charge again, the "time reset" button can be pressed, and the feeding motor can re-charge according to the set time.www.khnwatertreatment.com