Before the use of mechanical fine screens, we all know that we need to check the normal or not of the various accessories, after the completion of the mechanical fine screens can be put into use, in order to ensure the safety of our staff and equipment. Before starting the mechanical fine screens, the shaft handle must be used to rotate at the tail of the motor. When the rake teeth move normally and there is no noise and vibration, the machine can start. The shaft handle should be removed.  

Before starting the mechanical fine screens, test whether the running direction of the motor is the same as that of the rake teeth of the equipment, and then point and walk several times before everything is normal, so that it can be put into normal operation. For the automatic operation of mechanical fine screens sewage treatment equipment, the necessary inspection and installation before opening can better protect the mechanical grille equipment in operation.  

During the operation of the mechanical fine screens, if there are fibre impurities blocking the rake gear chain, it should be cleaned up in time to avoid affecting the normal operation of the equipment, and then according to the amount of garbage, the garbage hanging on the discharging plate should be cleaned regularly. The normal operation of the motor and the non-operation of the rake teeth indicate that the overload causes the safety pin to be cut off and the power supply to be cut off to replace the overload safety pin. 

Maintenance of mechanical fine screens reducer shall be carried out in accordance with relevant regulations, and finally butter shall be added to bearings and chains every month. It can be concluded that the service life of the mechanical fine screens can be prolonged mainly by paying attention to the maintenance methods when we use the mechanical fine screens in our daily life. http://khnwatertreatment.com/