The aeration pipe of the tube diffuser is generally installed in a "non-" shape. When the fixed installation is installed, the end-end perforated cover end and the support frame are added to strengthen the end support of the aeration pipe. The advantage of this installation is that the aeration is uniform.

When installing the aeration tube, it must be on a horizontal line, in a vertical position, and evenly apply the force, and must not be forced on one side, so that the installation is not balanced, affecting the gas distribution. Use a torque clamp to secure another aeration tube. After installation, inject clean water into the pool and immediately debug the system. 

If the aeration tube of the tube diffuser is not put into use immediately after the test run, the water level needs to be raised to a position 1 m above the aeration tube. Please pay attention to the water evaporation factor to ensure that the equipment remains above the water level before it is finally put into operation. In the case of frost, the water level above the aeration pipe should be at least 10% of the minimum temperature.

www.khnwatertreatment.com