The Electrocoagulation wastewater treatment system includes:

1. pH adjusting pool, reaction pool and conveying pump. The reaction pool is located beside the pH adjusting pool and connected with the pH adjusting pool. After the wastewater is injected into the pH adjusting pool, the pH adjusting pool is adjusted, and then the chemical reaction is carried out from the pH adjusting pool to the reaction pool.

2. Electrocoagulation wastewater treatment device, which is composed of several pipelines connected in series and circuitously, is equipped with a water inlet valve at the first pipeline, a pressure valve at the outlet of the last pipeline, and any pipeline in the middle. Installation of test valves at the junction of the upper section of the cathode and the charging valves at the junction of the next section of the cathode; and each section of the pipeline includes an anode and a cathode for Electrocoagulation. The cathode is tubular and forms a tube cavity inside the cathode; the anode is rod-shaped or tubular, and the anode is supported by several support frames at the center of the tube cavity of the cathode, and the cathode jacket has an avoidable pipeline leakage. Leak-proof hose;

4. The outlet of the Electrocoagulation wastewater treatment device is connected with the pH return tank, and the outlet of the coagulation tank is connected with the coagulation tank. The outlet of the coagulation tank is connected with the solid-liquid separation device. The water production pump is connected with the solid-liquid separation device and the treated water is sent out.www.khnwatertreatment.com