In sewage treatment, people will pay attention to the use of treatment equipment, and also to the operation efficiency of these equipment, with high treatment effect, so after the introduction of aeration equipment, it has been recognized by many users. In the sewage treatment process, many users will pay attention to the use of ventilation device, because the equipment planning and manufacturing cycle are very advanced technology, and can also achieve one A higher level. However, when using sewage treatment equipment, you also need to pay attention to cleaning and maintenance operations. Here is a brief introduction of the cleaning and maintenance methods of the aerator.

    Usually in the operation of the ventilation device, the equipment with this material accumulation will be blocked, and the equipment will show that the problem will increase with the passage of time, the operation time of the aerator equipment will continue to increase, a large number of impurities will be accumulated in the sewage treatment, these impurities will also contain a large amount of calcium, which will also affect the role of sewage treatment. Therefore, operators need to clean the aeration equipment regularly. Before cleaning, the water in the tank shall be cleaned first, then the aeration equipment shall be removed according to the standard process, and then the equipment shall be cleaned.

    In order to ensure the efficiency of the aerator, many people choose special reagents when cleaning the equipment. But it will also make the cleaning effect of impurities more complete, so some reagents can be used in cleaning and maintenance. Formic acid reagent is generally used for equipment cleaning. Formic acid will not affect the efficiency of the equipment. When cleaning the aerator, check the equipment parts and replace the damaged parts in time.