The center drive scraper is a suspended mud removal device. The raw water flows through the center water distribution tube and flows into the overflow tank around the pool. As the flow rate decreases, the suspended matter in the water body settles on the bottom of the pool by gravity, and is driven by deceleration. The drive of the suspended component is used to scrape the sludge into the central mud collecting tank by the scraper, and relies on hydrostatic pressure or pump to remove the tank.

In the process of the center drive scraper, it is mainly composed of the reducer drive mechanism, the central transmission device, the scraping system, the underwater bearing and the mud collecting tank. The load of the whole scraper is applied to the fixed span. The pool path is on the working bridge.

Product Features of Center Drive Scraper

1. Simple structure and convenient maintenance and management.

2. The operation is stable and the work is safe and reliable.

3. The effect of scraping sludge is good, and the moisture content of the discharged sludge is low.

Main performance of the center drive scraper

(1) The bottom of the pool is scraped, and the driving device is driven by a deceleration driving mechanism, which has a compact structure and high mechanical efficiency;

(2) Skewed type scraping board has good continuity and high efficiency of collecting mud. The scraping rubber board is installed under the stainless steel scraping board to ensure that the scraping mud is completely clean and there will be no floating mud phenomenon.

(3) The ratio of the bottom slope of the pool is 1:10, and the sludge resistance is negligible when scraping mud.

(4) The main beam is made of square steel and has strong structural strength. It is sprayed with hot-dip galvanizing and has strong anti-corrosion performance. The main beam can also be directly used for concrete pouring, and the investment is more economical.

(5) Simple operation, remote control is possible.www.khnwatertreatment.com