Application of chlorine dioxide generator in drinking water
Mar 25,2020
1. The raw material conversion rate is 95%, the purity of chlorine dioxide is 98%, and the production cost is low;
2. It has a residual liquid automatic separation device, which is a pure disinfectant when it enters the water body, which will not cause secondary pollution to the water body, and avoid the generation of disinfection by-products while disinfecting;
3. The generator is equipped with an on-line raw material monitoring system to avoid the non-reaction caused by a single raw material entering the reactor and a large number of unreacted raw materials entering the water body causing water pollution accidents;
4. Folding differential dual temperature multi-stage reactor and new technology of negative pressure aeration, PID control technology is used to directly detect and control the temperature of the reaction medium to ensure that the reaction proceeds under the optimal conditions, so that the conversion rate of raw materials is greater than 95% .
5. The automatic separation device for residual liquid is used to make the purity of disinfectant reach 99.99%, which avoids secondary pollution caused by unreacted raw materials and by-products entering the water body and endangering human health.
6. The online monitoring of the safety status is adopted to ensure that the generator starts and runs in a safe state, and an automatic chlorine dioxide absorption and treatment device is set up. In an emergency, the chlorine dioxide generated by the reaction is automatically absorbed and treated to ensure that Chlorine dioxide does not leak and affect the environment.
7. With raw material online monitoring system: When the amount of one or two raw materials of the generator changes, the metering pump is automatically calibrated to avoid generator failure caused by improper ratio of the two raw materials to ensure disinfection. safety.
8. Unique multi-level security protection system, no hidden dangers.
9. The reaction system is made of special titanium material that is resistant to corrosion and high temperature and has a long service life.
10. Compared with the generator using sodium chlorite as raw material, the disinfection cost is reduced by 70-80%.