1. Check whether the drum grille is damaged during transportation;

2. If the reducer base is removed due to transportation needs, it should be restored first, pay attention to the transmission axis of the two sprockets, and check the chain and chain after installation. Cover;

3. Check whether the size of each embedded part is consistent with the picture of the embedded part. After the above points are checked, the equipment can be installed in place;

4. The drum grille is installed on the whole machine, and the support on the frame Align with the embedded steel plate on the ground, and then weld the support steel plate and the embedded part into a whole. If there is a gap at the bottom of the grille after installation, it can be sealed and fixed with cement;

5. There are abnormal conditions or abnormal signals during operation. Shut down and cut off the power supply in time, check, troubleshoot in time, do not force the east to avoid accidents;

6. When installing, pay attention to the level and vertical to the ground; the

drum grille is a kind of rake tooth assembly, mainly by the rack , Driving device, rake chain, cleaner and other parts. The equipment is not only simple in structure, stable in operation and strong in slag removal.

https://www.khnwatertreatment.com/