During the operation of the air flotation machine, the roller is mainly made of its alloy chilled cast iron. During the operation, the surface has a high hardness, which is very durable and wear-resistant during use. Steam, cooling water or heat-conducting oil can be introduced into the inner cavity of the drum to adjust the working temperature of the drum to meet the requirements of the rubber mixing process.

The adjustment of the roller distance of the air flotation machine is manual or electric. It is accurate and sensitive in the process of adjusting the distance. The whole equipment is small in size, light in weight and flexible in operation. It is very convenient during the operation. The machine vibration mechanism is equipped with a set of high-frequency micro-vibration devices under the mold plate. The molding sand in the box is agitated in the micro-seismic, and evenly filled to various parts, and then pressed while shaking, and the molding sand quickly reaches the compactness we need.

The air flotation machine has large and dense bubbles, and its diameter will be smaller during operation, which can reach 20 microns to a certain extent, and the adsorption force of the entire equipment is stronger. During the reaction process, the microbubbles are strongly combined with the flocs. , the separation of suspended solids and water is completed in an instant, completely and completely, and the sludge at the bottom of the pool can be discharged intermittently. The operation shows that the treatment effect is stable, reliable, up to standard, easy to operate, easy to master, low operating cost, and widely praised by users.

https://www.khnwatertreatment.com/