The chain type slag scraper is mainly used for continuous sludge discharge at the bottom of the advective sedimentation tank, sand settling tank and oil separator in the sewage treatment plant. To a certain extent, it can continuously discharge oil pollution on the water surface. Or to remove scum, especially suitable for sedimentation tanks with a lot of sediment.

Structural characteristics of chain type slag scraper

1. The chain slag scraper mainly adopts its truss structure to a certain extent. In the process of design, the stability of the scraper operation and the convenience of maintenance and management are mainly considered.

2. The drive mechanism of the chain type slag scraper adopts the form of long shafts with both ends of the shaft being concentrated. There are two sets of wheels, one is the driving wheel, and the other is the driven wheel.

3. Independent flap mechanism, using push rod flap.

4. When the chain type slag scraper is running, each slag scraper mainly adopts two sets of independent driving mechanisms for driving and scraper turning, which are converted to work alternately through electrical control. The particles contained in the water are too large and the specific gravity is limited.

https://www.khnwatertreatment.com/